Hydraulic and heat transfer study of SiO2/water nanofluids in horizontal tubes with imposed wall temperature boundary conditions

By S. Ferrouillat, A. Bontemps, J. Ribeiro, J. Gruss, O. Soriano. 2011

189 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Experimental investigations of the viscosity of nanofluids at low temperatures (2012, background): “[11] reported tha t the pumping power is very high and that the practical benefits of using nanofluids is not signi ficant compared to base fluid.”
The influence of multi-walled carbon nanotubes on single-phase heat transfer and pressure drop characteristics in the transitional flow regime of smooth tubes (2013, unknown): “Equation 2 can be extended to include ellipsoidal particles [18,28]:”
Experimental determination of turbulent forced convection heat transfer and friction factor with SiO2 nanofluid (2013, background): “[11] undertook an experimental investigation for the determination of heat transfer coefficient with SiO2 nanofluid under cooling and heating conditions at fluid inlet temperatures of 20 C, 50 C and 70 C for 200 < Re < 10,000 with 22 nm size particles dispersed in water.”
Efficiency of carbon nanotubes water based nanofluids as coolants (2014, background): “In fact, a significant increase in viscosity can lead to a significant pressure drop which can reduce the practical benefits of nanofluids in some industrial applications [15,16].”
An experimental investigation of a hybrid photovoltaic/thermoelectric system with nanofluid application (2017, background): “Table 3 shows the nanofluids physical properties (Ferrouillat et al., 2011; Hosseinzadeh et al., 2015).”