Broadband Information Broadcasting Using LED-Based Interior Lighting

By Jelena Grubor, Sebastian Randel, Klaus-Dieter Langer, Joachim W. Walewski. Journal of Lightwave Technology, 2008

504 citations recorded by the source corpus.

Subfields: Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/478146831936e9e75e975c69195cda7b96483266

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Electrical and Electronic Engineering

Citations in the corpus

High data rate multiple input multiple output (MIMO) optical wireless communications using white led lighting (2009, methodology): “In [4] complex multilevel schemes are used, and in [20] equalized Non-Return to Zero On-Off”
LED Based Indoor Visible Light Communications: State of the Art (2015, methodology): “• Receiver Equalization: Demonstrations on postequalization at the receiver [55], [126] using a simple first order equalizer after PD signal amplification, has yielded a bandwidth of 50 MHz and data rate of 100 Mb/s. Combining pre-equalization at the transmitter with postequalization at the receiver”
Compensation of a VLC Phosphorescent White LED Nonlinearity by Means of Volterra DFE (2013, methodology): “Here, the most prominent source is a white LED, which uses a blue LED flux that is converted to white light at a phosphorescent layer [1], [2].”
PAM-DMT for Intensity-Modulated and Direct-Detection Optical Communication Systems (2009, background): “Recently, the use of OFDM and DMT has also been proposed for a range of optical systems including single-mode fiber, multimode fiber, and optical wireless [1]–[4].”
Position Accuracy of Time-of-Arrival Based Ranging Using Visible Light With Application in Indoor Localization Systems (2013, background): “6, the CRB is plotted versus optical power for various receiver areas and for T = 0.01 s, fc = 2 MHz, and d = 5 m.”
LED Based Wavelength Division Multiplexed 10 Gb/s Visible Light Communications (2016, background): “In the case of using the same BW for flat RGB channels, and assuming that a high signal-to-noise ratio (SNR) is generally provided in a typical illumination scenario [20], equation (3) can be rearranged as”
A Gigabit/s Indoor Wireless Transmission Using MIMO-OFDM Visible-Light Communications (2013, methodology): “After the MIMO demultiplexing process, the received signal is equalized in the time domain using a first-order equaliser [3] (TDE on the diagram), and transformed back to the frequency domain.”