Ductility and Plasticity of Nanostructured Metals: Differences and Issues

By Yuntian Zhu, Xiaolei Wu. Heterostructured Materials, 2018

194 citations recorded by the source corpus.

Ductility  is one of the most important  mechanical properties  for metallic structural materials. It is measured as the  elongation  to failure of a sample during standard uniaxial tensile tests. This is problematic and often leads to gross overestimation for nanostructured metals, for which non-standard small samples are typically used. Uniform elongation is a better measure of ductility for small samples because they are less sensitive to sample size. By definition, ductility can be considered as tensile  plasticity , but it is often confused with plasticity. In principle, ductility is largely governed by  strain hardening  rate, which is in turn significantly affected by  microstructure , whereas plasticity is primarily controlled by crystal structure or the number of available slip systems to accommodate  plastic deformation . In practice, ductility is important for preventing catastrophic failure of structural components during service, whereas plasticity is critical for shaping and forming metals into desired shape and geometry to make structural components. Nanostructured metals typically have high plasticity, but low ductility, due to their low strain hardening capability. Increasing strain hardening rate via modifying microstructure is the primary route to improving ductility.

Subfields: Materials Chemistry, Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/42dccf2f132574efb7772d4b43bbb0010ae94fbe