Recent Developments in 2G HTS Coil Technology

By Drew W. Hazelton. IEEE transactions on applied superconductivity, 2009

196 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Superconducting wind turbine generators (2010, background): “Tape manufacturers are investing efforts to create HTS conductor which is less sensitive to magnetic field (improved pinning) and at the same time has higher uniformity with respect to the angle of the external magnetic field (127, 128).”
Progress in the Development of a Superconducting 32 T Magnet With REBCO High Field Coils (2014, background): “Advances in the development of high-temperature superconductors (HTS), specifically Rare-Earth-BaCu oxides (REBCO) [1]–[3], in terms of current density, mechanical properties”
HTS twisted stacked-tape cable conductor (2011, methodology): “coated HTS tapes have superb mechanical behavior in response to strains [11, 12], the 4 mm wide 2G HTS tapes were wound on a 3.”
Recent Developments in High-Temperature Superconducting Magnet Technology (Review) (2014, background): “2) The axial tensile strength for reinforced Bi2223 conductor is 250 MPa and the mechanical strength is relatively isotropic.”
A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors (2019, background): “value of critical stresses at cryogenic temperature: >800MPa in the longitudinal tensile direction [59] (about 700MPa at 100 000 cycles [60]) and between 300 and 750MPa (depending on Cu thickness) in transverse compression [61]; if textured Ni is used as the substrate the critical transverse pressur”