MULTIPLE JETS IN ELECTROSPINNING: EXPERIMENT AND MODELING

By S. Theron, A. Yarin, Eyal Zussman, Ehud Kroll. 2005

489 citations recorded by the source corpus.

Subfields: Biomaterials, Biomedical Engineering, Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/4127c9505a938f25253538dbbcec5be5f058f345

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomaterials

1. Tong Lin
2. Haitao Niu
3. Seeram Ramakrishna
4. S. Kundu
5. Nandana Bhardwaj
6. W. Teo
7. Keith M. Forward
8. R. Padhye

In Biomedical Engineering

1. Seeram Ramakrishna
2. Haitao Niu
3. Tong Lin
4. W. Teo
5. Keith M. Forward
6. S. Kundu
7. Nandana Bhardwaj
8. Gregory C. Rutledge

In Electrical and Electronic Engineering

1. Haitao Niu
2. Seeram Ramakrishna
3. Tong Lin
4. Nandana Bhardwaj
5. S. Kundu
6. W. Teo
7. Keith M. Forward
8. R. Padhye

Citations in the corpus

• Free surface electrospinning from a wire electrode (2012, background): “However, these configurations often lead to non-uniform electric fields, resulting in discontinuous operation and poor quality non-woven mats [4-8].”
• Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review (2006, unknown): “46 Multiple needle tips were also used to prepare blends of PVA and cellulose acetate.”
• Review of digital printing technologies for electronic materials (2020, methodology): “A multi-nozzle implementation has been proposed but most previous studies are limited to research purposes because of low nozzle density [155, 156].”
• Fiber generators in needleless electrospinning (2012, methodology): “A straightforward way to increase the electrospinning productivity is to increase needle number [29, 30], the setup of which is also called “multineedle electrospinning.”
• Electrospinning: a fascinating fiber fabrication technique. (2010, methodology): “To increase the production rate of these spun fibers, a two-layer electrospinning system,with the lower layer being a ferromagnetic suspension and the upper layer a polymer solution and multiple spinnerets or nozzle systems arranged in a line/circle/matrix and a new bottom-up gas-jet electrospinning”
• A review on electrospinning design and nanofibre assemblies (2006, methodology): “However, as mentioned earlier, the presence of nearby spinnerets has an undesirable influence on the electrospinning jets (Theron et al 2005).”
• Electrospinning of polymer melts: Phenomenological observations (2007, background): “diameter reduction and good quality fiber collection [32, 33 ].”