Pool boiling of nano-fluids on horizontal narrow tubes
By Sarit K. Das, Nandy Putra, W. Roetzel. 2003
281 citations recorded by the source corpus.
Subfields: Biomedical Engineering, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/40bc9c36feb236f4cd241ed5a204e30ff88b40e2
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
- R. Saidur
- Ali J. Chamkha
- E. Abu‐Nada
- Somchai Wongwises
- Arun Sadashiv Mujumdar
- Xiangrong Wang
- S. Kakaç
- Stephen U. S. Choi
In Mechanical Engineering
- E. Abu‐Nada
- Ali J. Chamkha
- R. Saidur
- Somchai Wongwises
- Arun Sadashiv Mujumdar
- Xiangrong Wang
- S. Kakaç
- Stephen U. S. Choi
Citations in the corpus
- Small particles, big impacts: A review of the diverse applications of nanofluids (2013, background): “Throughout the literature [76], [179–184], a wide variety of heaters and particle materials were used.”
- A critical synthesis of thermophysical characteristics of nanofluids (2011, background): “These mechanisms include formation of nanoparticles coatings on the surface during pool boiling of nanofluids [99], decrease in active nucleation sites due to nanoparticle sedimentation on the boiling surface [107], and the wettability change of the surface [20,21].”
- Heat Transfer in Nanofluids—A Review (2006, background): “The deterioration increased with reducing diameter of narrow tubes [ 92 ], as shown in Figure 10 .”
- Critical review of heat transfer characteristics of nanofluids (2007, methodology): “[3,4], the nanoparticles deteriorated the boiling characteristics of water in the nucleate boiling regime.”
- Experimental investigation into the pool boiling heat transfer of aqueous based γ-alumina nanofluids (2005, result): “Similar phenomenon was also observed in a later study by Das et al., (2003b) using smaller heaters with 4.5 and 6 mm outside diameters.”