Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy

By W. Guo, Rujian Sun, Binwen Song, Ying Zhu, Fei Li, Zhigang Che, Bo Li, Chao Guo, Lei Liu, P. Peng. Surface & Coatings Technology, 2018

179 citations recorded by the source corpus.

Abstract Laser shock peening is combined with laser additive manufacturing to modify the surface microstructures and mechanical properties of as manufactured Ti6Al4V titanium alloy. Microstructural evolution, microhardness distribution, residual stress distribution and mechanical properties are examined before and after LSP. After peening, the interplanar spacing of lattices of both α and β phases decreases without any new phase formation. Grain refinement is achieved with average grain size of α phase decreasing from 33.6 to 24.3 μm. High density of dislocation lines, tangles, and multi-directional mechanical twins are observed. Residual stress is turned from tensile to compressive state with an affected depth of around 700 μm. The hardening layer reveled by microhardness is around 900 μm in depth. Grain refinement accounts for the yield strength, ultimate tensile strength, and elongation enhancements after peening.

Subfields: Materials Chemistry, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/3faa15527933b96779aab44e473d9421ee80494e