Backscattered electron imaging of cementitious microstructures: Understanding and quantification

By Karen L. Scrivener. 2004

905 citations recorded by the source corpus.

Subfields: Mechanical Engineering, Ocean Engineering, Surfaces, Coatings and Films

View Paper: https://www.semanticscholar.org/paper/3f8d72f38616d556e040e458cfeb684f0db38055

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Mechanical Engineering

In Ocean Engineering

In Surfaces, Coatings and Films

Citations in the corpus

Interfacial transition zones in recycled aggregate concrete with different mixing approaches (2012, neutral): “Moreover, it is intimately intermingled with low density Calcium Silicate Hydrate (C–S–H) and calcium hydroxide (CH) in the groundmass [27,28].”
Relation of expansion due to alkali silica reaction to the degree of reaction measured by SEM image analysis (2007, background): “It is also useful for studying degradation processes [4,6].”
The effect of autoclave pressure, temperature and duration time on mechanical properties of reactive powder concrete (2013, background): “There is considerable infilling of the capillary pores by this undifferentiated products during hydration [29,30].”
On the use of peak-force tapping atomic force microscopy for quantification of the local elastic modulus in hardened cement paste (2012, result): “The unhydrated particles show striations similar to some observed by Scrivener [20], thus suggesting”
Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques (2009, methodology): “Morphological information may be obtained by means of scanning electron microscopy and transmission electron microscopy [11,12,15,17].”
Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study (2020, methodology): “For segmenting the air voids, the so-called tangent-slope method [50,51] (illustrated in Fig.”
Critical aspects of nano-indentation technique in application to hardened cement paste (2011, methodology): “The threshold 170 of the last region (clinker) was chosen according to the local minimum in the histogram (similar to [16]), whereas the first two were estimated by visual inspection of the image.”
Quantification of the degree of reaction of fly ash (2010, methodology): “BSE coupled with images analysis has been successfully used to quantify the reaction of Portland cement clinkers [18–20] and of blast furnace slags [21] and to study the extent of alkali aggregate reaction in concrete samples [22].”