Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate
By N. Hill, M. Haghi. 2014
142 citations recorded by the source corpus.
Subfields: Automotive Engineering, Industrial and Manufacturing Engineering, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/3b093dbed547a9b40d16df5fb551a8e7b71b483a
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Automotive Engineering
In Industrial and Manufacturing Engineering
In Mechanical Engineering
Citations in the corpus
- Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts (2017, background): “These parameters were determined to be the most important and have been investigated by several other authors (Bellini & Güçeri 2003; Montero et al. 2001; Tymrak et al. 2014; Smith & Dean 2013; Hill & Haghi 2014).”
- Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing (2016, background): “FFF machines can also print parts from amorphous polycarbonate [25], semi-crystalline poly-lactic acid [15] and other thermoplastic materials [42].”
- A review on composite materials and process parameters optimisation for the fused deposition modelling process (2017, background): “It was also observed that the material exhibits lower elongation, tensile and yield strength when the failure mechanism is due to welds when compared to that of the beads (Hill and Haghi 2014).”
- Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing (2017, background): “The most common printing materials are amorphous polymer melts such as linear polycarbonate (PC) [3] and acrylonitrile butadiene styrene (ABS) [2], a melt containing rubber nano-particles that provide toughness even at low temperatures.”
- Optimising the FDM additive manufacturing process to achieve maximum tensile strength: a state-of-the-art review (2019, methodology): “An additional material is investigated in a study by [4] who consider samples printed in polycarbonate (PC) utilising the ASTM D638 standard.”
- Measurements of the mechanical response of unidirectional 3D-printed PLA (2017, background): “Some studies [14-18] have recently reported the tensile strength of different 3D-printed plastics, as summarised in Table 1.”
- Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer (2018, background): “Commercially, a variety of traditional feedstock thermoplastic filament materials are supported by FDM based 3D printers, which make them ideal for the consumer market, including acrylonitrile butadiene styrene (ABS) [20], polypropylene (PP) [15], polycarbonate (PC) [21], polylactic acid (PLA) [22],”
- Materials Testing Standards for Additive Manufacturing of Polymer Materials: State of the Art and Standards Applicability (2015, methodology): “Composite models have been used to understand the deformation of these materials with an eye toward design variables and identifying fusion contributions to properties [58, 60, 65].”