Theory and measurement of backscattering from RFID tags

By Pavel V. Nikitin, K. Rao. IEEE Antennas & Propagation Magazine, 2006

526 citations recorded by the source corpus.

Subfields: Electrical and Electronic Engineering, Media Technology

View Paper: https://www.semanticscholar.org/paper/3a50b26964a9b2b50bdf76fd91296d0f590b3d2f

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Electrical and Electronic Engineering

In Media Technology

Citations in the corpus

PASSIVE WI-FI: Bringing Low Power to Wi-Fi Transmissions (2016, methodology): “Specifically, the signal strength at the receiver, Pr, can be modeled using Friis path loss [34] as follows,”
Chip Impedance Matching for UHF RFID Tag Antenna Design (2008, background): “Distance between the tag and the receiving reader antenna is R2 while σtag is the radar cross-section (RCS) of the tag which can be approximated by [5]”
Lab-on-Skin: A Review of Flexible and Stretchable Electronics for Wearable Health Monitoring. (2017, methodology): “while the read-out scheme is based on impedance backscattering.(165) The reflected power is”
Passive UHF RFID antennas for sensing applications: Principles, methods, and classifcations (2013, methodology): “The backscattered power, R TP ← , is measurable (Figure 3a) by the reader in terms of the received signal-strength indicator (RSSI), here assumed to correspond [13, 14] to the binary modulating state having mod chipZ Z= .”
Ambient backscatter: wireless communication out of thin air (2013, background): “a constant signal [21] to facilitate the detection of small level changes.”
BackFi: High Throughput WiFi Backscatter (2015, background): “BackFi is also related but complementary to recent work on harvesting power from RF sources such as TV signals [28, 48, 30], cellular transmissions [33] and WiFi [27, 21, 25, 32].”
Antennas and Propagation in UHF RFID Systems (2008, background): “Scalar RCS of an RFID tag antenna connected to any particular load can be found directly from classical theory of loaded scattering antennas [89] and has been discussed in literature [90-91].”
An Overview of Near Field UHF RFID (2007, methodology): “The equipment was the same as described in [102].”
Passive RFID Strain-Sensor Based on Meander-Line Antennas (2011, background): “The backscattered power is directly measurable by the reader in terms of the received signal strength indicator (RSSI), here assumed to correspond [10], [11] to the binary modulating state having .”