Characterization of alkali activated slag paste after exposure to high temperatures

By P. Rovnaník, P. Bayer, P. Rovnaníková. 2013

221 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Use of waste glass in alkali activated cement mortar (2018, background): “As mentioned, when the AAC mortar was subjected to high temperature, a much stronger ceramic bond would form due to the crystallization of akermanite [78,79].”
Characterization and application of municipal solid waste incineration (MSWI) bottom ash and waste granite powder in alkali activated slag (2017, background): “The exothermic peaks at around 720 C and 850 C are attributed to the decomposition of carbonates and the formation of new crystalline phases in high temperatures, respectively (Rovnanik et al., 2013).”
Characterization of alkali activated slag–fly ash blends containing nano-silica (2015, background): “be noted that all mixtures show an exothermic peak at around 800 C, which is attributed to the formation of crystalline phases under high temperature [63].”
Properties of alkali activated slag-fly ash blends with limestone addition (2015, background): “This heat release peak is attributed to the formation of more ordered crystalline phases under high temperature, which was also found in a previous study concerning alkali activated slag [62].”
Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag–fly ash blends (2015, background): “showed that the C-A-S-H type gels completely lose the binding water when heated up to 800 C, and the destroyed gel structure starts to form more ordered crystalline phases [52].”