Damage detection in composite materials using lamb wave methods

By S. Kessler, S. Spearing, Constantinos Soutis. 2002

836 citations recorded by the source corpus.

Subfields: Biomedical Engineering, Civil and Structural Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/395baf7b06a7e8e3a947d2878999f1e5e745f4ed

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomedical Engineering

In Civil and Structural Engineering

In Mechanics of Materials

Citations in the corpus

Detection of Low-velocity Impact Damage in Composite Plates using Lamb Waves (2004, result): “These transducers have been successfully used to excite the A0 and S0 modes at low frequencies in other studies [13,17,18].”
Performance assessment and validation of piezoelectric active-sensors in structural health monitoring (2006, background): “PZT active-sensors. These transducers can be installed either individually ( Kessler et al 2002 ) or”
Integrated Structural Health Assessment Using Piezoelectric Active Sensors (2005, methodology): “A more complete description on the Lamb wave propagation technique can be found in the references [1,12].”
Detecting Damage in Composite Material Using Nonlinear Elastic Wave Spectroscopy Methods (2008, methodology): “The use of guided waves in ultrasonic inspection of plate structures has been used successfully for the localization of defects (inclusions, delaminations, cracks) but is more complicated than conventional bulk wave inspection [7–10].”
Assessment of delay-and-sum algorithms for damage detection in aluminium and composite plates (2014, methodology): “The most straightforward method is to subtract the pristine signals from the signals acquired at the inspection time and to apply a triangulation technique based on time of flight of the damage reflected signal to locate the damage (Kessler et al 2002, Diamanti et al 2005).”
Piezoelectric Transducer-Based Structural Health Monitoring for Aircraft Applications (2019, neutral): “to , the”
Energy Harvesting for Structural Health Monitoring Sensor Networks (2008, background): “Many of the features identified for impedance-based and wave propagation-based SHM studies fall into this category [5, 6, 7, 8].”
Built-in Sensor Network for Structural Health Monitoring of Composite Structure (2007, methodology): “In active sensing mode, both wave propagation and impedance-based structural health monitoring methods have been developed (Liang et al., 1994; Giurgiutiu et al., 2002; Kessler et al., 2002; Park et al., 2000, 2003; Qing et al., 2005).”