Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization

By A. Arbelaiz, B. Fernandez, Guillermo Cantero, R. Llano-Ponte, Á. Valea, I. Mondragon. 2005

348 citations recorded by the source corpus.

Subfields: Mechanical Engineering, Polymers and Plastics

View Paper: https://www.semanticscholar.org/paper/3856c1c970b10c1dfe0a0cb838a8f0a290471536

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Mechanical Engineering

1. P. Davies
2. C. Baley
3. Nicolas Martin
4. N. Mouret
5. M. Gupta
6. R. K. Srivastava
7. Q. Shubhra
8. A. Alam

In Polymers and Plastics

1. A. Bledzki
2. M. Gupta
3. P. Davies
4. O. Faruk
5. C. Baley
6. H. Fink
7. M. Sain
8. R. K. Srivastava

Citations in the corpus

• Fibre/matrix adhesion of cellulose fibres in PLA, PP and MAPP: A critical review of pull-out test, microbond test and single fibre fragmentation test results (2014, result): “The improvement in fibre/matrix adhesion by the presence of MAPP in PP matrices is effected by an improved load transmission from the matrix to the fibre, which leads to an increase in the tensile strength of the composites; this has been shown in other studies, too [31–34].”
• Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride (2014, methodology): “Often, polyolefin thermoplastics such as polypropylene and polyethylene have been used as the matrix polymer [8,13].”
• Review of natural fibre-reinforced hybrid composites (2018, background): “Arbelaiz et al. 68 investigated the effect of fibre treatments and matrix modification on the mechanical properties of flax fibre bundle/PP composites and flax fibre bundle/glass/PP hybrid composites.”
• Influence of the degree of retting of flax fibers on the tensile properties of single fibers and short fiber/polypropylene composites (2013, background): “The recycling of these materials is possible while preserving original properties (Arbelaiz et al., 2005; Bourmaud and Baley, 2007).”
• Mechanical Properties of Hybrid Fibers-Reinforced Polymer Composite: A Review (2016, methodology): “6 — Injection Molding [130] Glass/hemp Polypropylene — — 366 11.”
• Mechanical properties of polypropylene composites (2013, background): “The ratio of fiber weight to alkali solution volume was 1:20.(152) Joseph et al.”