ABAQUS modeling for post-tensioned reinforced concrete beams

By Swoo-Heon Lee, A. Abolmaali, K. Shin, Hee-Du Lee. 2020

137 citations recorded by the source corpus.

Abstract Finite element analysis (FEA) using ABAQUS software was performed to investigate the behavior of post-tensioned concrete beams. This study is an attempt to examine the concrete damage behavior using a concrete damaged plasticity (CDP) model in ABAQUS, as well as the effect of an external post-tensioning (EPT) steel rod system. Concrete is a well-used material in many architectural and civil structures, with behavior exhibiting different characteristics in compression and tension; it also shows an inelastic-nonlinear behavior. These properties of concrete make modeling or simulation of the material difficult. In reinforced concrete, there is particular difficulty with respect to the bond-slip relationship between concrete and steel. However, in this paper the finite element analysis for concrete beams through ABAQUS simulation has been carried out with some assumptions, including perfect bond of steel and concrete and the CDP model for concrete property. In comparing analysis and experimental results, the simulated tensile deformations are similar to actual crack patterns in tests and the analytical responses such as strength, deflection, and stress of external rods are in good agreement with the measured responses.

Subfields: Building and Construction, Civil and Structural Engineering

View Paper: https://www.semanticscholar.org/paper/33108ebb036aa4f8ab523d9722dc1627609ff85e