Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis

By Daniel P. Bondeson, Aji P. Mathew, Kristiina Oksman. 2006

1,310 citations recorded by the source corpus.

Subfields: Biomaterials, Biomedical Engineering, Plant Science

View Paper: https://www.semanticscholar.org/paper/32a23e2f962f012d3a2b9983aa3fa957d7eadee6

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomaterials

In Biomedical Engineering

In Plant Science

Citations in the corpus

Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010, methodology): “, microcrystalline cellulose [45], bacterial cellulose [67], algal cellulose (valonia) [68], hemp [69], tunicin [70,71], cotton [62],”
Dispersion and characteristics of surfactant modified cellulose whiskers nanocomposites (2007, methodology): “Cellulose nanowhiskers (CNW) were used as reinforcement and prepared as described elsewhere [39].”
Morphological investigation of nanoparticles obtained from combined mechanical shearing, and enzymatic and acid hydrolysis of sisal fibers (2010, methodology): “Because of the low solid consistencies of the slurry, the acid concentration used in this study was 10% lower than the concentration classically used in the literature (around 65 wt%) ( Bondeson et al. 2006; Morandi et al. 2009; Beck-Candanedo et al. 2005; Helbert et al. 1996; Habibi et al. 2008; S”
Physical and chemical reinforcement of chitosan film using nanocrystalline cellulose and tannic acid (2015, methodology): “Methods The NCC was prepared using the acid hydrolysis method described by Bondeson et al. (2006), with a slight modification.”
Approaching zero cellulose loss in cellulose nanocrystal (CNC) production: recovery and characterization of cellulosic solid residues (CSR) and CNC (2012, methodology): “Literature work has failed to identify the co-existence of both CNC and CSR (Bondeson and Oksman 2006; Hamad and Hu 2010).”
Nanocellulose from Agricultural Wastes: Products and Applications—A Review (2021, methodology): “Ultrasonic treatments can be used to facilitate the dispersion of the crystalline cellulose in the suspension [27,29].”
Nanocomposites of poly(lactic acid) reinforced with cellulose nanofibrils (2010, background): “Also, the surface modification of cellulose nanofibrils will affect the degradation rate (Heux et al. 2000; Gousse et al. 2002; Oksman et al. 2006; Petersson et al. 2007; Dai and Kadla, 2009).”
Polymer Composites Reinforced with Natural Fibers and Nanocellulose in the Automotive Industry: A Short Review (2019, background): “Various acids may be used for the isolation of CNCs, such as hydrochloric [66], phosphoric [67], formic [68], and sulfuric [69], and different acids can lead to different CNCs, as observed in Figure 3.”