A miniature UWB planar monopole antenna with 5-GHz band-rejection filter and the time-domain characteristics

By Y. Cho, Ki Hak Kim, D.H. Choi, Seung Sik Lee, Seong‐Ook Park. IEEE Transactions on Antennas and Propagation, 2006

478 citations recorded by the source corpus.

Subfields: Aerospace Engineering, Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/32455532917f9d0ecb337da44051b65a7f3c209c

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Aerospace Engineering

In Electrical and Electronic Engineering

Citations in the corpus

Compact Tapered Slot UWB Antenna With WLAN Band Rejection (2009, background): “is mainly obtained through some modification of the full-band solution—for example, by adding slots [5] to the antenna metallization.”
UWB Band-Notched Monopole Antenna Design Using Electromagnetic-Bandgap Structures (2011, unknown): “Usually, one slot/parasitic element is adequate to generate a notch-band [8], [9], [11], [13], [15].”
Ultrawideband Band-Notched Folded Strip Monopole Antenna (2007, background): “In addition to the above-mentioned design considerations, it is also noted that owing to the overlapped spectra of UWB and WLAN radios, ultrawideband antennas with filtering property at the 5–6 GHz band have been proposed not only to mitigate the potential interference but also to remove the require”
Bandwidth Enhancement of Novel Compact Single and Dual Band-Notched Printed Monopole Antenna With a Pair of L-Shaped Slots (2009, methodology): “Single [5] and multiple [9] half-wavelength U-shaped slots are embedded in the radiation patch to generate the single and multiple band-notched functions, respectively.”
Multiple Band-Notched UWB Antenna With Band-Rejected Elements Integrated in the Feed Line (2013, background): “, U-shaped [7], [8], C-shaped [9], and arc-shaped [10], [11], quarter-wavelength open-ended slots [11]–[13] on the radiating patch or its ground plane, and utilizing half-wavelength parasitic elements near the radiator [14], [15] or feed line [16].”
Novel Modified UWB Planar Monopole Antenna With Variable Frequency Band-Notch Function (2008, methodology): “Recently to generate the frequency band-notch function, modified planar monopoles with inverted U-slot [4], U-slot [5] and small strip bar [6] are used.”
A Band-Notched Ultrawideband Printed Monopole Antenna (2006, background): “Recently, a miniature UWB planar monopole antenna with 5-GHz band-rejection characteristics is reported [17], which was investigated its characteristics not only in frequency domain but also in time domain; however, it presents a complicated structure.”
A Novel UWB Antenna With Dual Notched Bands for WiMAX and WLAN Applications (2012, unknown): “, such as H-shaped slot [2], U-shaped slot [3], C-shaped slot [4], etc.”
UWB Elliptical Monopoles With a Reconfigurable Band Notch Using MEMS Switches Actuated Without Bias Lines (2009, methodology): “The directions of the current in the inner and outer side of the slot are opposite and they cancel each other as explained in detail in [14], [19].”
A Miniaturized Elliptic-Card UWB Antenna With WLAN Band Rejection for Wireless Communications (2007, background): “By comparing the measured parameters of two measurements the antenna transfer function can be calculated as [17]”
A Compact Ultrawideband Antenna With 3.4/5.5 GHz Dual Band-Notched Characteristics (2008, background): “These UWB antennas with filtering property at the 5–6 GHz band have been proposed not only to mitigate the potential interferences but also to remove the requirement of an extra bandstop filter in the system [4], [5].”