Characterization of alkali-treated jute fibers for physical and mechanical properties

By D. Ray, B. Sarkar. 2001

378 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites (2008, positive): “ Ray and Sarkar (2001) also showed the favourable improvement in tenacity and modulus of jute fibres by 45% and 79%, respectively, after the treatment in 5% NaOH solution for 8 h at 30 C. For ramie fibres, Zhou et al. (2004) reported a slight increase in tenacity of the treated fibres when only usi”
Effect of Chemical treatment on Flexure Properties of Natural Fiber-reinforced Polyester Composite (2011, result): “This finding has also been reported by other authors [6, 12].”
Investigation of Physico-Chemical Properties of Alkali-Treated Prosopis juliflora Fibers (2014, methodology): “Chemical composition of the alkali treated PJFs, in terms of cellulose, hemicellulose, and lignin, was estimated by standard analytical methods.([13]) Ash content of the alkali-treated PJFs was determined by the ASTM E1755-01 method.”
Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr) (2020, background): “The component of the fibers then became well separated, which increment in volume with loss in weight caused the density to decrease.(77) Besides that, from Table 1, it can be observed that the densities of SPNCC-I, SPNCC-II, and SPNCC-III decreased insignificantly throughout the prolongation of the”