Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites
By M. Jawaid, H. P. S. Abdul Khalil, A. A. Bakar. 2011
257 citations recorded by the source corpus.
Subfields: Biomaterials, Mechanical Engineering, Polymers and Plastics
View Paper: https://www.semanticscholar.org/paper/28a06feaae8a8b0564c9e73d2538716a2de45cb9
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomaterials
In Mechanical Engineering
In Polymers and Plastics
Citations in the corpus
- A review on mechanical behavior of natural fiber based hybrid composites (2012, background): “Jawaid et al.(53) have done a comparative study between composites prepared from oil palm fibers, jute fibers and combination of both.”
- Fibre hybridisation in polymer composites: a review (2014, background): “[148] noticed a slightly higher tensile strength if the jute layers were positioned on the outside of the oil palm empty fruit bunch layers.”
- Review of natural fibre-reinforced hybrid composites (2018, background): “Jawaid et al. 103 investigated the effect of jute fibre hybridization and different layering pattern on the physical properties of EFB epoxy composites.”
- Mechanical performance of woven kenaf-Kevlar hybrid composites (2014, background): “Jawaid et al.(24) studied the mechanical (tensile, flexural, impact) and physical (hardness, water absorption, and thickness swelling) properties of oil palm empty fruit bunch/glass hybrid reinforced polyester composites.”
- Investigation on the mechanical behavior of areca sheath fibers/jute fibers/glass fabrics reinforced hybrid composite for light weight applications (2018, result): “Similar behavior was seen in the study of woven jute and oil palm fruit fibers composites, where the outer skin jute fibers showed good tensile properties compared to the inner core jute fiber composites [24].”
- Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application (2016, background): “However, there are some limitations which required further improvement such as its moisture absorption due to hydrophobicity, dimensional stability and poor wettability, low thermal stability during processing and its poor adhesion with synthetic fibres [5,6].”
- Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf-aramid hybrid laminated composites (2015, background): “[6] studied the effect of layering sequence on tensile and flexural performance of tri layer oil palm empty fruit bunches (EFB)/ woven jute (Jw) fibre reinforced epoxy hybrid composites.”