Using Unmanned Aerial Vehicles (UAV) for High-Resolution Reconstruction of Topography: The Structure from Motion Approach on Coastal Environments
By Francesco Mancini, Marco Dubbini, Mario Gattelli, Francesco Stecchi, Stefano Fabbri, Giovanni Gabbianelli. Remote Sensing, 2013
755 citations recorded by the source corpus.
The availability of high-resolution Digital Surface Models of coastal environments is of increasing interest for scientists involved in the study of the coastal system processes. Among the range of terrestrial and aerial methods available to produce such a dataset, this study tests the utility of the Structure from Motion (SfM) approach to low-altitude aerial imageries collected by Unmanned Aerial Vehicle (UAV). The SfM image-based approach was selected whilst searching for a rapid, inexpensive, and highly automated method, able to produce 3D information from unstructured aerial images. In particular, it was used to generate a dense point cloud and successively a high-resolution Digital Surface Models (DSM) of a beach dune system in Marina di Ravenna (Italy). The quality of the elevation dataset produced by the UAV-SfM was initially evaluated by comparison with point cloud generated by a Terrestrial Laser Scanning (TLS) surveys. Such a comparison served to highlight an average difference in the vertical values of 0.05 m (RMS = 0.19 m). However, although the points cloud comparison is the best approach to investigate the absolute or relative correspondence between UAV and TLS methods, the assessment of geomorphic features is usually based on multi-temporal surfaces analysis, where an interpolation process is required. DSMs were therefore generated from UAV and TLS points clouds and vertical absolute accuracies assessed by comparison with a Global Navigation Satellite System (GNSS) survey. The vertical comparison of UAV and TLS DSMs with respect to GNSS measurements pointed out an average distance at cm-level (RMS = 0.011 m). The successive point by point direct comparison between UAV and TLS elevations show a very small average distance, 0.015 m, with RMS = 0.220 m. Larger values are encountered in areas where sudden changes in topography are present. The UAV-based approach was demonstrated to be a straightforward one and accuracy of the vertical dataset was comparable with results obtained by TLS technology.
Subfields: Environmental Engineering, Geology, Space and Planetary Science
View Paper: https://www.semanticscholar.org/paper/207d27919b5ba210d3bbc3927df192c54270a123
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Environmental Engineering
- B. Cooke
- Rob S. Skakun
- R. Hall
- Guillermo Castilla
- Simon Salon
- Mark W. Smith
- Frantisek Chudý
- Julián Tomastík
In Geology
- Simon Salon
- Mark W. Smith
- Frantisek Chudý
- Julián Tomastík
- Martin Mokros
- Duncan Quincey
- Jonathan L. Carrivick
- Daniel Tunák
Citations in the corpus
- Structure from motion photogrammetry in physical geography (2016, methodology): “A large number of studies apply SfM-MVS to coastal environments (Harwin and Lucieer, 2012; James and Quinton, 2014; Mancini et al., 2013; Ružić et al., 2014) to extract the topography of beaches, dunes or cliffs.”
- Accuracy of Photogrammetric UAV-Based Point Clouds under Conditions of Partially-Open Forest Canopy (2017, background): “Other studies reported RMSEs of residuals of the bundle adjustment transformation on used GCPs as low as a few millimetres [27], or slightly over 1 cm [28], while the flight altitudes were higher—40 m and 120 m.”
- Remote sensing of forest pest damage: a review and lessons learned from a Canadian perspective* (2016, background): “With a UAV, it is possible to capture GPS-referenced, above-canopy digital photographs that can then be stitched together to produce three-dimensional information from unstructured aerial images (Mancini et al. 2013).”
- Accuracy of Unmanned Aerial Vehicle (UAV) and SfM Photogrammetry Survey as a Function of the Number and Location of Ground Control Points Used (2018, background): “For example, reference [17] states that the number of GCPs used could be further decreased without significant loss of accuracy.”
- Monocular depth estimation based on deep learning: An overview (2020, methodology): “Although the above geometry-based methods can efficiently calculate the depth values of sparse points, these methods usually depend on image pairs or image sequences [6], [10].”