Rupture mechanisms in combined tension and shear : Experiments

By I. Barsoum, J. Faleskog. 2007

589 citations recorded by the source corpus.

Subfields: Civil and Structural Engineering, Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/1c1f88152c169c6624fa97f42b275cf28b9a4517

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Civil and Structural Engineering

In Mechanical Engineering

In Mechanics of Materials

Citations in the corpus

Micromechanically-motivated phenomenological Hosford–Coulomb model for predicting ductile fracture initiation at low stress triaxialities (2015, methodology): “…cell configurations and loading conditions (Koplik and Needleman, 1988; Brocks et al., 1995; Needleman and Tvergaard, 1992; Pardoen and Hutchinson, 2000; Barsoum and Faleskog, 2007; Tvergaard, 2008, 2009; Scheyvaerts et al., 2011; Nielsen et al., 2012; Rahman et al., 2012; Tekoglu et al., 2012).”
Micromechanical analysis on the influence of the Lode parameter on void growth and coalescence (2011, result): “However, it has been observed in recent experimental studies by Wierzbicki et al. (2005) and Barsoum and Faleskog (2007a) that the stress triaxiality is insufficient to characterize the stress state in ductile failure.”
A hybrid approach for modelling of plasticity and failure behaviour of advanced high-strength steel sheets (2013, background): “Recent studies have revealed that another parameter, Lode angle, related to the third invariant of the deviatoric stress tensor, has also an unnegligible impact on the fracture strain (Bai and Wierzbicki, 2008; Barsoum and Faleskog, 2007; Gao et al., 2009a; Mirone and Corallo, 2010).”
Application of extended Mohr–Coulomb criterion to ductile fracture (2009, background): “Results of bi-axial fracture tests on tubular specimens in the tension/torsion loading frame was published by Barsoum and Faleskog (2007) , while Korkolis and Kyriakides (2008) studied fracture of 6260-T4 aluminum tubes subjected to internal pressure and axial tension or compression.”
Continuum Models of Ductile Fracture: A Review (2010, background): “In particular, it was shown that depending on the material, ductility may decrease when stress triaxiality decreases from 1=3 (pure tension) to 0 (pure shear) (Bao and Wierzbicki, 2004; Barsoum and Faleskog, 2007a).”
Rupture mechanisms in combined tension and shear—Micromechanics (2007, methodology): “In Barsoum and Faleskog (2007), experiments are carried out on a double notched tube specimen subjected to a combination of tension and torsion, as shown in Fig.”
Ductile failure modeling (2016, background): “Full three dimensional analyses for shear specimens containing spherical voids have been carried out by Barsoum and Faleskog (2007a) in order to model experiments on ductile fracture in double notched tube specimens loaded in combined tension and torsion (Barsoum and Faleskog 2007b).”