Cooling techniques for improved productivity in turning

By Vishal S. Sharma, M. Dogra, N. Suri. 2009

576 citations recorded by the source corpus.

Subfields: Biomedical Engineering, Materials Chemistry, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/11fea85cf2b4dd94bdd86cc96c9e3d8ce10ed31f

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomedical Engineering

1. Min Yang
2. Changhe Li
3. Yanbin Zhang
4. Munish Kumar Gupta
5. A. Pramanik
6. Ainusyafiqah Shaaroni
7. S. Niketh
8. G. Samuel

In Materials Chemistry

1. S. Niketh
2. G. Samuel
3. Imtiaz Ahmed Choudhury
4. P. Venkateswara Rao
5. S. A. Lawal
6. Guy Littlefair
7. Yusoff Nukman
8. Nor Azwadi Che Sidik

In Mechanical Engineering

1. Min Yang
2. Changhe Li
3. Yanbin Zhang
4. Guy Littlefair
5. Chetan
6. Munish Kumar Gupta
7. Runze Li
8. A. Pramanik

Citations in the corpus

• Application of sustainable techniques in metal cutting for enhanced machinability: a review (2015, background): “To eliminate the detrimental effects of heat and temperature, Liquid Nitrogen (LN) is applied to the cutting zone (Sharma et al., 2009).”
• Electrostatic atomization minimum quantity lubrication machining: from mechanism to application (2022, methodology): “[36, 48] Cryogenic Cryogenic air/LN2/LCO2 Excellent cooling performance Good Good High Yes”
• An overview of current status of cutting fluids and cooling techniques of turning hard steel (2017, methodology): “[9], thermal conductivity of tools, tool design and cooling methods are the factors that affect the amount of heat lost from the cutting zone.”
• Surface texturing for tribology enhancement and its application on drill tool for the sustainable machining of titanium alloy (2017, background): “Sliding friction can be controlled by various techniques like cryogenic cooling, tool surface coatings and applying solid lubricants (Sharma et al., 2009).”
• Machining Parameters Optimization of Titanium Alloy using Response Surface Methodology and Particle Swarm Optimization under Minimum-Quantity Lubrication Environment (2016, background): “Various sorts of cooling strategies such as cryogenic cooling, minimum quantity lubricant (MQL)= near-dry machining, flood cooling, high-pressure cooling, machining with solid coolants=lubricants and machining with air=vapor=gas as coolant have been presently developed to control the cutting region ”
• A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant (2013, background): “One of the notable conclusions made by Sharma et al. (2009) for the performance of MQL/NDM technique under different cutting regime to be effective was the use of vegetable oil, ester oil, or equivalent synthetic MWFs.”