The use of microfibrillated cellulose produced from kraft pulp as strength enhancer in TMP paper
By Ø. Eriksen, K. Syverud, Ø. Gregersen. 2008
295 citations recorded by the source corpus.
Subfields: Biomaterials, Mechanics of Materials
View Paper: https://www.semanticscholar.org/paper/0f3f20daeda01c54ebc4d18422a4f3f900185172
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomaterials
In Mechanics of Materials
Citations in the corpus
- Wood cellulose biocomposites with fibrous structures at micro- and nanoscale (2011, methodology): “added cellulose nanofibers to low density paper structures based on lignin-containing thermomechanical wood pulp fibers in order to improve the mechanical performance [24].”
- Recent Strategies in Preparation of Cellulose Nanocrystals and Cellulose Nanofibrils Derived from Raw Cellulose Materials (2018, unknown): “Themain disadvantages include the following: (1) the high energy consumption for homogenization process could reach up to 70MW h/t [159]; (2) the clogging of the system occurred frequently when using long fibers as raw materials [160].”
- Microfibrillated cellulose and new nanocomposite materials: a review (2010, background): “Even higher values reaching 70,000 kWh/tonne have also been reported (Eriksen et al. 2008).”
- Cellulose nanofibrils: Challenges and possibilities as a paper additive or coating material – A review (2014, methodology): “The effect of this is reduced brightness and reduced opacity which e.g. was observed by Eriksen et al. (2008) who found a 2-5 m 2 /kg reduction in light scattering coefficient of TMP sheets containing 4% CNF.”
- A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods (2011, background): “are cycled through the homogenizer approximately 10–20 times (Andresen et al. 2006; Andresen and Stenius 2007; Erkisen et al. 2008; Herrick et al. 1983; Stenstad et al. 2008; Syverud and Stenius 2009; Turbak et al. 1983); overall, it can be stated that homogenization is an energy-intensive process.”
- Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review (2016, background): “Many scholars have shown that MFC and NFC can be used as follows in papermaking applications: as strength additives; to enhance barrier properties in food packaging, to improved paper gloss, to reduce paper grammage and for smart and sustainable packaging (Yoo and Hsieh 2010; Mörseburg and Chinga-Ca”
- Nanofibrillated cellulose: surface modification and potential applications (2013, background): “energy inputs is necessary in order to release the NFC and to overcome interfibrillar hydrogen bonds into both crystalline and amorphous domains [68].”
- Nanofibrillated cellulose as paper additive in eucalyptus pulps (2012, unknown): “The benefits of using NFC as reinforcement in paper have been explored only recently, but there are signs of improvement in permeability and tensile index Eriksen et al. 2008; Mörseburg and Chinga-Carrasco 2009; Taipale et al. 2010; Zhang et al. 2012).”