Strengthening Mechanisms in Crystal Plasticity
By A. Argon. 2007
667 citations recorded by the source corpus.
Subfields: Materials Chemistry, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/086f8dc6c122c93996125be78ba6b09f278309d6
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Materials Chemistry
In Mechanical Engineering
Citations in the corpus
- Design of D022 superlattice with superior strengthening effect in high entropy alloys (2019, neutral): “The traditional solid solution strengthening mechanism is based on the dilute solution alloys, where strengthening effect is due to the strain field arising from mismatch between solute and solvent [47].”
- Microscopic theory of hardness and design of novel superhard crystals (2012, background): “403 suppressed with decreasing grain size due to the Hall–Petch effect [155], while the resistance to the plastic deformation gets weak due to increasing grain boundary shear.”
- Slip planes in bcc transition metals (2013, background): “One of the important features of plasticity in bcc metals is its strong temperature dependence, which is a result of the thermally activated motion of screw dislocations.(1,112,113) Owing to the non-planar core of the screw dislocations in bcc metals, they have high lattice friction and thus their m”
- Theory of strengthening in fcc high entropy alloys (2016, background): “For the sinusoidal energy well, the stress-dependent energy barrier is then accurately described [11] by the asymptotic result”
- Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al-Zr-Sc-Si alloys (2012, methodology): “The strength increments for order strengthening (Drord), coherency and modulus strengthening (Drcoh + Drmod), and strengthening by the Orowan bypass mechanism (DrOr), are calculated employing the methodology described [67,68], as performed previously [37,40,42,43].”
- Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing (2012, neutral): “First, the introduction of Al atoms leads to solution strengthening: the strength increment introduced by adding 8% Al atoms into the Cu matrix is estimated at 20 MPa [22,23].”
- Role of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys (2012, neutral): “[2,99,100].”