Novel maximum-power-point-tracking controller for photovoltaic energy conversion system

By Y. Kuo, Tsorng-Juu Peter Liang, Jiann-Fuh Chen. IEEE transactions on industrial electronics (1982. Print), 2001

745 citations recorded by the source corpus.

Subfields: Artificial Intelligence, Electrical and Electronic Engineering, Renewable Energy, Sustainability and the Environment

View Paper: https://www.semanticscholar.org/paper/07dfdccfebc27932bfa8ea36c64ce2f88a2d23bf

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Artificial Intelligence

In Electrical and Electronic Engineering

In Renewable Energy, Sustainability and the Environment

Citations in the corpus

Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model (2011, methodology): “The single-diode models [5–15] were based on the assumption that the recombination loss in the depletion region is absent.”
Photovoltaic Power-Increment-Aided Incremental-Conductance MPPT With Two-Phased Tracking (2013, methodology): “Therefore, several studies have subsequently presented versatile approaches to promote the INC-MPPT suiting for the PV relative systems in application [6], [9], [12], [15], [18], [22], [23].”
Everlast: Long-life, Supercapacitor-operated Wireless Sensor Node (2006, methodology): “Numerous methods proposed to date for tracking the solarcellMPPincludethehill climbing method, short-circuitmethod, and open-circuit voltage method [12, 13, 14, 15 ].”
Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter (2011, neutral): “It is based on the incremental and instantaneous conductance of the PV module [6], [19], [22], [ 23 ].”
Explicit Expressions for Solar Panel Equivalent Circuit Parameters Based on Analytical Formulation and the Lambert W-Function (2014, background): “This adjustment can be done numerically [14,15,33–38] or analytically [8,38–41]; based on the data resulting from I-V curves experimentally measured, or based only on the data available from the manufacturers’ datasheets.”
Analysis and Improvement of Maximum Power Point Tracking Algorithm Based on Incremental Conductance Method for Photovoltaic Array (2007, background): “FromFig. 6(e) and(f), itcanbeseen that theproposed algorithm tracks thenewMPP within 1.5second, andtheconventional onespends about 8 .5 second atstepdecreased illumination level.”
Modeling and circuit-based simulation of photovoltaic arrays (2009, background): “The value of Rp is generally high and some authors [11]–[14], [17], [18], [25] – [28] neglect this resistance to simplify the model.”
A Method for MPPT Control While Searching for Parameters Corresponding to Weather Conditions for PV Generation Systems (2004, neutral): “MPPT control algorithms have been studied using the formula obtained on the basis of these conditions regarding parasitic resistances (5) [9], [12].”
Grid-Connected Boost-Half-Bridge Photovoltaic Microinverter System Using Repetitive Current Control and Maximum Power Point Tracking (2012, methodology): “Numerous MPPT techniques have been studied and validated, for example, perturb and observe (P&O) method [35]–[38], incremental conductance method [39], ripple correlation method [40], reduced current sensor method [41], etc.”
Parallel-Connected Solar PV System to Address Partial and Rapidly Fluctuating Shadow Conditions (2009, methodology): “Many MPPT methods have been reported, such as perturb and observe [8]–[12], incremental conductance [13], [14], neural network based [15], [16], fuzzy logic control [17], [18], etc.”
Modeling and Optimization of a Solar Energy Harvester System for Self-Powered Wireless Sensor Networks (2008, methodology): “The most popular ones are Perturb and Observe (P&O) [ 13 ], [19] and Fractional Open-Circuit Voltage (FOCV) [14], which is the one we adopted.”