NUMERICAL STUDY OF FORCED CONVECTIVE HEAT TRANSFER OF NANOFLUIDS: COMPARISON OF DIFFERENT APPROACHES

By Roghayyeh Lotfi, Y. Saboohi, A. Rashidi. 2010

371 citations recorded by the source corpus.

Subfields: Biomedical Engineering, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/06645d32d163cfb268e460bebad65a53e067a8e5

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomedical Engineering

In Mechanical Engineering

Citations in the corpus

Two phase mixed convection Al2O3–water nanofluid flow in an annulus (2011, methodology): “The mixture model implementations and its good prediction in nanofluids problems has been proved by several works such as (Lotfi et al., 2010; Bianco et al., 2009; Akbarinia and Laur, 2009; Mirmasoumi and Behzadmehr, 2008a, 2008b; Behzadmehr et al., 2007).”
Application of Computational Fluid Dynamics (CFD) for nanofluids (2012, methodology): “[83] different approaches including single-phase, mixture and Eulerian two phase models were compared while studying the forced convection of a nanofluid in a horizontal tube.”
Comparison of single and two-phase models for nanofluid convection at the entrance of a uniformly heated tube (2014, neutral): “One of these methods used in this study is Euleriane Mixturemodel (EMM)wheremomentum and energy equations are solved for mixture phase coupled with continuity equation for each phase, then phase velocities are related by empirical correlations [16,17].”
Eulerian–Eulerian two-phase numerical simulation of nanofluid laminar forced convection in a microchannel (2011, methodology): “…nanoparticle volume concentration distribution in the entrance region (Wen and Ding, 2004) and the homogeneous model under-estimates the observed heat transfer enhancement in the experiments (Heris et al., 2006; Behzadmehr et al., 2007; Bianco et al., 2009; Fard et al., 2010; Lotfi et al., 2010).”
Numerical study of mixed convection in an inclined two sided lid driven cavity filled with nanofluid using two-phase mixture model (2011, background): “This means that the slip velocity between the fluid and particles may not be zero [23]; therefore it seems that the two-phase approach is better model to apply the nanofluid [24,25].”