Determination of the stiffness of cellulose nanowhiskers and the fiber-matrix interface in a nanocomposite using Raman spectroscopy
By R. Rusli, S. Eichhorn. 2008
254 citations recorded by the source corpus.
Subfields: Biomaterials, Materials Chemistry
View Paper: https://www.semanticscholar.org/paper/036f58e225b0862a52c89e003d2f3568520c22d4
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomaterials
In Materials Chemistry
Citations in the corpus
- State of the Art Manufacturing and Engineering of Nanocellulose: A Review of Available Data and Industrial Applications (2013, background): “It should also be noted that wood NCCs prepared by mechanical treatment seems to have much lower moduli (50 - 100 GPa) [133] than those of bacterial NCCs. Copyright © 2013 SciRes.”
- Tensile strength of Iβ crystalline cellulose predicted by molecular dynamics simulation (2014, methodology): “Commonly-employed experimental techniques are the in situ tensile test using inelastic X-ray diffraction (Diddens et al. 2008), Raman (Rusli and Eichhorn 2008; Sturcová et al. 2005), three point bending using atomic force microscopy (AFM) (Iwamoto et al. 2009) and indentation using AFM (Lahiji et…”
- Nanocellulose as a novel nanostructured adsorbent for environmental remediation: a review (2017, background): “…mechanical stiffness High modulus of CNC and CNF around 130 and 70 GPa, respectively, increasing the stiffness and the cohesion of the adsorbent Rusli and Eichhorn (2008) High crystalline degree High crystallinity degree of nanocellulose, ranging between 60 and 80% Enhancing the chemical…”
- Mechanical and thermal properties of waterborne epoxy composites containing cellulose nanocrystals (2013, methodology): “While the filler modulus (Ef ¼ 50 GPa) appears to be out of the range of reported literature values, the Young’s modulus data for the composite material is within the upper and lower bounds of expected reinforcement for a glassy polymer reinforced with CNCs [2].”
- On the use of nanocellulose as reinforcement in polymer matrix composites (2014, background): “The values for a single cellulose nanofibres obtained from these measurements were found to be between 100 and 160 GPa [57–61].”