Structure formation of regenerated cellulose materials from NMMO-solutions

By H. Fink, P. Weigel, H. Purz, J. Ganster. 2001

911 citations recorded by the source corpus.

Subfields: Biomaterials, Biomedical Engineering

View Paper: https://www.semanticscholar.org/paper/02e22e2f669beaaab05f9fbcd327af8cbf8a0270

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomaterials

1. Shuji Fujisawa
2. K. Syverud
3. T. Hänninen
4. A. Isogai
5. Tsuguyuki Saito
6. W. Hamad
7. Chuanwei Miao
8. A. Michud

In Biomedical Engineering

1. Shuji Fujisawa
2. A. Isogai
3. Tsuguyuki Saito
4. T. Hänninen
5. K. Syverud
6. W. Hamad
7. Chuanwei Miao
8. A. Michud

Citations in the corpus

• Biodegradable polymer films from seaweed polysaccharides: A review on cellulose as a reinforcement material (2017, background): “This material can be further chemically and/or mechanically processed into modified forms such as micro/ nanoscale cellulose and cellulose derivatives (ether and ester) for use in cellulose-based composites, thin polymer films and hydrogels (Figure 4) [31].”
• Review: Catalytic oxidation of cellulose with nitroxyl radicals under aqueous conditions (2018, methodology): “These regenerated celluloses are prepared rom cellulose/NaOH/CS2/water, cellulose/N-methylmorpholine-oxide/water, and cellulose/Cu(NH3)4(OH)2/water solutions, espectively, by wet or wet/dry spinning [8,9].”
• Dry jet-wet spinning of strong cellulose filaments from ionic liquid solution (2014, background): “…School of Chemical Engineering, Aalto University, Aalto, P.O. Box 16300, 00076 Espoo, Finland e-mail: herbert.sixta@aalto.fi significantly better than those of regular viscose filaments: e.g. the tensile strengths are 630 versus 330 MPa, respectively (Fink et al. 2001; Röder et al. 2009).”
• Ioncell-F: ionic liquid-based cellulosic textile fibers as an alternative to viscose and Lyocell (2016, background): “The observed morphology is similar to the Lyocell-type fiber that is represented by a smooth fiber surface, round cross-section, and homogeneous and dense fibrillar structure.(8) Furthermore, it is expected that the Ioncell fibers would behave similarly toward mechanical abrasion as Lyocell fibers a”